Check DTF artwork for faint pixels and low DPI
Two preventable artwork problems cause most transfer reprints: near-invisible pixels left by background removers, and small files stretched across a wide print.
Short answer. A faint-pixel check flags stray pixels at very low opacity so you can remove them before printing. Effective DPI is the post-crop source pixels divided by the print width in inches. SheetHop’s check is an advisory; your RIP still owns white ink.
Faint-pixel sweep
Drag the sweep to reveal 18 faint pixels around the crest, then apply an opacity cutoff. This runs in your browser with sample artwork and uploads nothing.
Advisory: 18 faint pixels flagged
Source pixels by garment placement
SheetHop’s builder reports effective DPI on both axes after any crop or trim. The bands are High at 150 and above, Medium at 100 to 149 and Low under 100. Widths below are common starting points; blanks vary, so measure the garment’s printable area.
| Placement | Common width | Pixels for 300 dpi | Pixels for 150 dpi |
|---|---|---|---|
| Inside collar or neck label | 2.5 to 3.0 in | 750 to 900 | 375 to 450 |
| Left chest | 3.5 to 4.25 in | 1,050 to 1,275 | 525 to 638 |
| Youth front | 8.5 to 9.5 in | 2,550 to 2,850 | 1,275 to 1,425 |
| Adult front | 10.5 to 11.5 in | 3,150 to 3,450 | 1,575 to 1,725 |
| Full back or oversize hoodie | 12 to 14 in | 3,600 to 4,200 | 1,800 to 2,100 |