How to stop semi-transparent halos and low-DPI reprints
A logo with its white background removed by a phone app can look clean on screen and still carry pixels at 2% to 8% opacity. White ink and hot-melt powder turn those into a chalky edge.
Short answer. Effective DPI = post-crop source pixels ÷ print inches. Exporting at 300 dpi keeps layout sharp but cannot add detail a 400-pixel screenshot never had.
Catch faint pixels before the file renders
SheetHop’s faint-pixel check inspects selected artwork for low-opacity edge pixels and lets a buyer or staff member apply an opacity cutoff. Pixels at or below the chosen opacity are removed and stronger pixels are kept, with the cleanup replayed from the original upload at 300 dpi.
Two-axis effective DPI after crop and trim
Checking only the original width misses art that was cropped tightly from a larger canvas. SheetHop calculates DPI on both axes after crop and transparent-margin trim.
- High, 150 dpi and above: clean transfer detail at normal viewing distance.
- Medium, 100 to 149 dpi: softness can show on fine type and thin halftones, so the buyer sees a warning.
- Low, under 100 dpi: pixelation is likely at garment size, so the buyer is asked to reduce the print width or upload larger artwork.
Halftone for soft gradients
Soft shadows and smoke fades do not print well as continuous low-opacity DTF ink. The editor can convert a soft fade into crisp halftone dots that hold up at 300 dpi.